Zaxcom Fusion User’s Manual______________________________________________________Chapter 2
53
Setup page
Page purpose:
It sets the main operating parameters such as sample-rate, number of channels, sync reference,
etc.
How to get here:
(
SHIFT
+
SETUP
keys
)
(
MENU
key
Setup
button
)
Figure 2-17 Setup page – with and without the Service button
Page Notes
None
Page Level Shortcuts
None
Sample Rate button
Pressing it takes you to the
Sample Rate page
{
p.55
}.
Record Channels button
Pressing it takes you to the
Record Track Select page
{
p.56
}.
Pre-Record Time button
Cycles between
Off
,
1 Sec
,
2 Secs
,
3 Secs
,
4 Secs
,
5 Secs
,
6 Secs
,
7 Secs
,
8 Secs
,
9 Secs
and
10 Secs
. This
means that the Fusion, using a memory buffer, begins recording a set number of seconds before the
REC
key
is
pressed. This eliminates 'pre-roll' problems at video transfer houses, and is invaluable in documentary recording
where events are not predictable.
IMPORTANT:
Pre-record time is only available when recording at 48.048 kHz and below. It is disabled at
higher sampling-rates.
Tone Level button
Cycles the level between
-20
,
-18
,
-16
,
-14
and
-12 dB
. The scale is in dBFS.
Operating Modes button
Pressing it takes you to the
Operating Mode page
{
p.57
}.
Meters button
Pressing it takes you to the
Meter Menu page
{
p.61
}.
Headphone Options button
Pressing it takes you to the
Headphone Options page
{
p.68
}.
Clock button
Pressing it takes you to the
Time/Date page
{
p.73
}.