Zaxcom Fusion User’s Manual______________________________________________________Chapter 2
41
Output Mix page
Page purpose:
This page routes the 8 analog inputs and 8 digital inputs directly to the outputs. The analog and
digital outputs for each channel receive identical signals. This can be used to feed monitors, video recorders,
Comtek transmitters, Ear Wig feeds, additional analog or digital recorders or any other device that accepts the
signals.
How to get here:
(
SHIFT
+
OUTPUT
keys
)
(
MENU
key
Output
Mix
button
)
Figure 2-7 Output Mix page
Page Notes
In this page, the top line shows the 8 available input channels (In1 – In8) plus the slate mic and the tone
generator. The vertical line of numbers on the right shows the 8 available output channels. The bottom row of
buttons control the parameters of the matrix selections.
In Figure 2-7, pre-fader analog input #1 is routed to output #1 (i.e. Boom-1), pre-fader analog input #2 is routed
to output #2 pre-fader (i.e. Boom-2) and the ten track mix, consisting of post-fader analog inputs 1 – 8 and pre-
fader digital inputs 1 and 2, are routed to Output #3 (i.e. the Director‟s feed).
Page Level Shortcuts
None
Output Mix Matrix buttons
Connects the Input Channel to the appropriate Output Channel(s). Pressing the button cycles through the
available choices, based on the setting of the
Analog/Digital In Toggle
,
Phase Invert
and
Pre-/Post-Fader
buttons
.
Indicator
Description
Black A
Analog input post-fader
Black A with Line
Analog input post-fader with signal phase inverted
White A
Analog input pre-fader
White A with Line Analog input pre-fader with signal phase inverted
Black D
Digital input post-fader
Black D with Line
Digital input post-fader with signal phase inverted
White D
Digital input pre-fader
White D with Line Digital input pre-fader with signal phase inverted
Table 2-3 Output Mix Indicator Descriptions
Preset button
This button allows you to save and recall up to five saved settings. Think of each preset as a page on which to
write the configuration.
