<4. Installation>
4-2
IM 01C25W05-01EN
Horizontal pipe mounting
Vertical pipe mounting
F0402.ai
50 mm (2-inch) pipe
U-bolt (L)
U-bolt (S)
Mounting bracket
U-bolt (S)
nut
U-bolt (L)
nut
U-bolt (L) nut
Mounting bracket
50 mm (2-inch) pipe
U-bolt (L)
U-bolt (S)
U-bolt (S)
nut
Figure 4.2
Transmitter Mounting
Gasket
F0403.ai
Figure 4.3
Gasketing
IMPORTANT
Tighten the hexagonal nut part of the capsule
assembly. See Figure 4.4.
Pressure-detector
section
F0404.ai
Figure 4.4 Tightening Transmitter
F0405.ai
Gasket
Stud bolt
Nut
Figure 4.5 Mounting Flanged Seals
IMPORTANT
Please use a gasket with an inside diameter
(ød) that is greater than the diameter of the
diaphragm seal. If a gasket with a smaller
inside diameter is used, the diaphragm may not
function correctly.
C20FW
Flange
size
80A(3B) 50A(2B)
40A(1 1/2B)
ød (mm)
90
61
44*
* Combination with C10FR is necessary.
