YOKOGAWA DPharp EJXC40A, User Manual

Page: 128 / 150

<9. Parameter Summary>
9-1
IM 01C25W05-01EN
9. Parameter Summary
Table 9.1 Parameter Summary
Function Label Item Description
Factory Default
Value
R/W *1
Analog output AO Alrm typ Output during hardware
failure
Indicates the output level during hardware
errors (including CPU errors) (Hi, Lo)
Depends on the
hardware switch
R
AO lower limit Lower limit of analog
output
Sets the lower limit of output current.
(3.80 to 21.60 mA)
3.80 mA W
AO upper limit Upper limit of analog
output
Sets the upper limit of output current.
(3.80 to 21.60 mA)
21.60 mA W
Auto recover Auto recover from
hardware error
Specifies the action to take when the cause
of sensor error is removed. (On, Off)
On W
Analog output
trim
Clear D/A trim Output adjustment clear Clears the analog output adjustment level. M
D/A trim D/A output adjustment Performs analog output adjustment for 4 mA
and 20 mA.
M
Scaled D/A trim Scaled D/A
output adjustment
Performs current output adjustment for 4 mA
and 20 mA. Scales and displays the output
value.
M
Channel flags Analog channel flag Indicates the analog channel flag. 0x00 R
Bi-direction
mode
Bi-dir mode Bidirectional mode Sets bidirectional flow mode on or off.
(On, Off)
Off W
Burst
mode
Burst mode Burst mode Switches to or out of burst mode. (Wired
HART Enabled, Off)
Off W
Burst Command Burst Command Cmd 1: PV
Cmd 2: % range/current
Cmd 3: Dyn vars/current
Cmd 9: Device vars w/ status
Cmd 33: Device Variables
Cmd 48: Read Additional Device Status.
Cmd 1: PV W
Burst Variable
Code
Device variable of burst
message
Sets the device variable of burst message.
Up to 8 slots.
W
Set Burst Trigger Burst trigger setting Sets the burst trigger mode and trigger
value.
M
Set Burst Period Burst period setting Sets the burst period and longest burst
update time.
M
Burst Msg Trigger
Mode
Burst message trigger
mode
Indicates the burst message trigger mode.
(Continuous, Window, Rising, Falling, On-
change)
Continuous R
Burst Trigger Level Trigger value Indicates the trigger value. 0.000000 R
Update Period Update period for Burst
mode
Indicates the shortest burst update time. Burst Message
1: 0.500 s
2: 60.000 s
3: 60.000 s
R
Max Update
Period
Longest update period for
Burst mode
Indicates the longest burst update time. 3600.000 s R
*1: R:read only, W:read and write, M:method, G:applicable for option code /DG6.