YOKOGAWA 701715 User Manual Download Page 59

Page: 59 / 454

2-33

IM 701730-01E

Explanation of Functions

Printing Screen Images <For the setup procedure, see chapter 11>

Screen images can be printed on the built-in printer (option), USB printer, or network

printer (when the Ethernet interface option is installed).

Built-in printer

DL1700E

Printer

USB PERIPHERAL

Printer

Ethernet

Saving and Loading Data from the Storage Medium
<For the setup procedure, see chapter 12>

The DL1700E allows various data to be stored to and loaded from the following storage

media.

• Floppy disk or PC card

• External USB storage (MO disk drive, hard disk drive, flash memory)

• Network drive (when the Ethernet interface option is installed)

USB device

DL1700E

USB PERIPHERAL

Floppy disk or PC card

Ethernet

Network drives

Saving and Loading Setup Data, Waveform Data, and Snapshot Waveforms

<For the setup procedure, see sections 12.5 to 12.7>

The setup data, waveform data, and snapshot waveforms can be saved to or loaded

from a selected storage medium.

Saving Screen Image Data and Displaying the Thumbnails of the Stored Screen

Image Data <For the setup procedure, see sections 12.9 and 12.10>

The screen image data can be stored to a selected storage medium. The data can be

stored in TIFF, BMP, PostScript, PNG, and JPEG formats allowing the data to be pasted

onto a document created with a DTP application. In addition, the thumbnails (reduced

and simplified images) of the screen image data saved to the storage medium can be

displayed on the instrument screen. This feature is useful for checking the contents of

the stored screen image data.

2.8 Other Useful Functions

Summary of Contents for 701715







































































































































































































































































































































































































































































Search results

Summary of Contents for 701715

Reviews:

Related manuals for 701715

Brands by name

Popular brands

YOKOGAWA 701715, User Manual

Search results

Summary of Contents for 701715

Reviews:

Related manuals for 701715

Brands by name

Popular brands