11-2
IM 701730-01E
Printer cover
Handle
PUSH OPEN button
To open the printer cover, push the PUSH-OPEN
button and lift the handle on the right side of the
printer cover.
Release arm
Move the release arm located on the right near
the front to the MAN FEED position.
Hold the roll paper so that the inner side of the
roll paper (the side that is not glossy) is facing up,
then place the roll in the holder.
MAN FEED
Turn the paper
feed knob
Roll paper
Release arm
Guide
Roller
Insert the edge of the roll paper evenly in the
space between the roller and the black guide,
then rotate the paper feed knob towards you until
about 10 cm of the paper extends beyond the top
of the roller.
FREE
HOLD
Move the release arm to the FREE position and
straighten out the paper. Then, move the release
arm to the HOLD position.
The printing will fail with an error message if
the release arm is in the FREE or MAN FEED
position during operation.
Pull the printer cover back to its original position
and close the cover. Make sure that the edge of
the roll paper feeds through the opening of the
printer cover.
Push the printer cover down firmly until it clicks
into place.
Note
The paper feeding may not be stable immediately after the roll paper is installed. Print two or
three pages of test images in advance.
11.1 Displaying and Labeling Computed Waveforms
