Yealink SIP-T42S IP, User Manual

Page: 131 / 200

Basic Call Features
121
6.
Click
Confirm
to accept the change.
Note
To park a call in FAC mode:
1.
During a call, press the
Park
soft key (You may need to press the
More
soft key to see the
Park
soft key) or the call park key (if configured).
-
If the call park code is not configured, you need to enter the call park code (e.g., *68).
Press , or the
Park
soft key.
-
If the call park code is configured, the phone will dial the configured call park code
shown as below:
2.
Do one of the following:
a)
If you want to park the call against the local extension.
1)
Press .
If the call is parked successfully, you will hear a voice prompt confirming that the
call is parked.
b)
If you want to park the call against desired extension.
1)
Enter an extension (e.g., 4603) where you want to park the call.
2)
Press or .
If the call is parked successfully, you will hear a voice prompt confirming that the
call is parked. The call is parked against the extension you entered.
To retrieve a parked call in FAC mode:
1.
Do one of the following:
-
If the park retrieve code is not configured, dial the park retrieve code (e.g., *88).
-
If the park retrieve code is configured, press the
Retrieve
soft key on the dialing
screen or retrieve park key (if configured) on the IP phone.
If the
Park
or
Retrieve
soft key doesn’t appear on the LCD screen, please select
Disabled
from
the pull-down list of
Custom Softkey
via web user interface at path
Settings-
>
Softkey
Layout
.