Yealink SIP-T42S IP User Manual Download Page 162

Page: 162 / 200

User Guide for the SIP-T42S IP Phone

152

Press the

Save

soft key to accept the change or the

Back

soft key to cancel.

Multicast paging key is configurable via web user interface at the path

Dsskey

Line Key

To configure a paging list key via phone user interface:

Press

Menu

Features

DSS Keys

Select the desired DSS key.

Press or , or the

Switch

soft key to select

Key Event

from the

Type

field.

Press or , or the

Switch

soft key to select

Paging List

from the

Key Type

field.

(Optional.) Enter the string that will appear on the LCD screen in the

Label

field.

Press the

Save

soft key to accept the change or the

Back

soft key to cancel.

Paging list key is configurable via web user interface at the path

Dsskey

Line Key

To configure paging list via phone user interface:

Press the paging list key when the phone is idle.

If the paging list key is not configured, you can also press

Menu

Features

Paging

List

to configure the paging list.

Press or to select a desired paging group.

The default tag is Empty if it is not configured before.

Press the

Option

soft key and then press the

Edit

soft key.

Enter the multicast IP address and port number (e.g., 224.5.6.20:10008) in the

Address

field.

The valid multicast IP addresses range from 224.0.0.0 to 239.255.255.255.

Enter the group name in the

Label

field.

Enter the desired channel in the

Channel

field.

The valid channel ranges from 0 to 30.

Press the

Save

soft key to accept the change.

Repeat steps 2 to 7, you can add more paging groups.

Summary of Contents for SIP-T42S IP









































































































































































































Search results

Summary of Contents for SIP-T42S IP

Reviews:

Related manuals for SIP-T42S IP

Brands by name

Popular brands

Yealink SIP-T42S IP, User Manual

Search results

Summary of Contents for SIP-T42S IP

Reviews:

Related manuals for SIP-T42S IP

Brands by name

Popular brands