Yealink SIP-T42S IP User Manual Download Page 154

Page: 154 / 200

User Guide for the SIP-T42S IP Phone

144

Press to adjust the volume of audio output.

Press the

Back

soft key to stop the playback. The phone returns to the Browse Audio

screen.

Press the Speakerphone key, the HEADSET key, or pick up the handset to alternate among
Speakerphone, Headset and Handset modes.

If you are playing back a recorded call and an incoming call arrives on your phone, the playback
pauses and the phone rings. You can press the

Play

soft key again to play the recording when

ending the call.

Deleting the Recorded File

To delete a recorded file:

Press

Menu

USB

Browse Audio

Press or to highlight the recording you want to delete.

Press the

Delete

soft key.

The LCD screen prompts the following warning:

Press the

soft key to confirm the deletion or the

Cancel

soft key to cancel.

Viewing the Storage Space

You can view the storage space (e.g., total space, used space, free space) of the USB flash drive
on the phone.

To view the storage space:

Press

Menu

USB

Storage Space

Recording Using a Record Key

There are two ways of call recording in server:



Record

: The phone sends a SIP INFO message containing a specific header “Record: on/off”

to trigger a recording.



URL Record

: The phone sends an HTTP URL request to trigger a recording. Contact your

Summary of Contents for SIP-T42S IP









































































































































































































Search results

Summary of Contents for SIP-T42S IP

Reviews:

Related manuals for SIP-T42S IP

Brands by name

Popular brands

Yealink SIP-T42S IP, User Manual

Search results

Summary of Contents for SIP-T42S IP

Reviews:

Related manuals for SIP-T42S IP

Brands by name

Popular brands