manualshive.com logo in svg

Yealink SIP-T42S IP, User Manual

The Yealink SIP-T42S IP phone offers a feature-rich communication experience. To get started quickly, download the free Quick Start manual from our website. Simplify setup and enjoy all the capabilities of this versatile phone. Explore our website to download the manual and unleash the power of the Yealink SIP-T42S IP.

Share
Download
background image

 

Copyright

 

Copyright © 2017 YEALINK(XIAMEN) NETWORK TECHNOLOGY

 

Copyright © 2017 Yealink (Xiamen) Network Technology CO., LTD. All rights reserved. No parts of this 
publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, 
photocopying, recording, or otherwise, for any purpose, without the express written permission of 
Yealink (Xiamen) Network Technology CO., LTD. Under the law, reproducing includes translating into 
another language or format. 

When this publication is made available on media, Yealink (Xiamen) Network Technology CO., LTD. gives 
its consent to downloading and printing copies of the content provided in this file only for private use 
but not for redistribution. No parts of this publication may be subject to alteration, modification or 
commercial use. Yealink (Xiamen) Network Technology CO., LTD. will not be liable for any damages 
arising from use of an illegally modified or altered publication. 

Trademarks 

Yealink®, the logo and the name and marks is trademark of Yealink (Xiamen) Network Technology CO., 
LTD, which are registered legally in China, the United States, EU (European Union) and other countries. 

All other trademarks belong to their respective owners. Without Yealink’s express written permission, 
recipient shall not reproduce or transmit any portion hereof in any form or by any means, with any 
purpose other than personal use. 

Warranty 

(1)

 Warranty   

THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS GUIDE ARE SUBJECT TO 
CHANGE WITHOUT NOTICE. ALL STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS 
GUIDE ARE BELIEVED TO BE ACCURATE AND PRESENTED WITHOUT WARRANTY OF ANY KIND, EXPRESS 
OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FOR THEIR APPLICATION OF PRODUCTS. 

(2) 

Disclaimer   

YEALINK (XIAMEN) NETWORK TECHNOLOGY CO., LTD. MAKES NO WARRANTY OF ANY KIND WITH 
REGARD TO THIS GUIDE, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Yealink (Xiamen) Network Technology 
CO., LTD. shall not be liable for errors contained herein nor for incidental or consequential damages in 
connection with the furnishing, performance, or use of this guide.   

(3) 

Limitation of Liability

 

Yealink and/or its respective suppliers are not responsible for the suitability of the information contained 
in this document for any reason. The information is provided “as is”, and Yealink does not provide any 
warranty and is subject to change without notice. All risks other than risks caused by use of the 
information are borne by the recipient. In no event, even if Yealink has been suggested the occurrence of 

Summary of Contents for SIP-T42S IP









































































































































































































Reviews:

No comments

Related manuals for SIP-T42S IP

Panasonic KX-TG8411FX Quick Manual preview
KX-TG8411FX
Brand: Panasonic Pages: 10
Olympia 4210 Operating Instructions Manual preview
4210
Brand: Olympia Pages: 28
VTech LS6195 Quick Start Manual preview
LS6195
Brand: VTech Pages: 2
Radio Shack 43-3906 Owner'S Manual preview
43-3906
Brand: Radio Shack Pages: 44
switel BDT 717 Operating Instructions Manual preview
BDT 717
Brand: switel Pages: 116
Uniden DECT2085-4WX Owner'S Manual preview
DECT2085-4WX
Brand: Uniden Pages: 68
Teledex MILLENNIUM 2010 Specifications preview
MILLENNIUM 2010
Brand: Teledex Pages: 2
Uniden DECT2080 Series Manuel Du Propriétaire preview
DECT2080 Series
Brand: Uniden Pages: 68
BRONDI GILDA Instruction Manual preview
GILDA
Brand: BRONDI Pages: 16
Panasonic EASA-PHONE KX-T2315 Operating Instructions Manual preview
EASA-PHONE KX-T2315
Brand: Panasonic Pages: 32
Jabra Speak 750 User Manual preview
Speak 750
Brand: Jabra Pages: 21
Philips TRIPLEX SDJ6051 Specifications preview
TRIPLEX SDJ6051
Brand: Philips Pages: 2
Philips Wall Jack SDJ6000W Specifications preview
Wall Jack SDJ6000W
Brand: Philips Pages: 2
Philips SWL6170 Specifications preview
SWL6170
Brand: Philips Pages: 2
Philips SWC4105 Specifications preview
SWC4105
Brand: Philips Pages: 2
Philips SWL4160 Specifications preview
SWL4160
Brand: Philips Pages: 2
Philips SDJ8040W/17 Brochure preview
SDJ8040W/17
Brand: Philips Pages: 1
Philips SDJ6060W Specifications preview
SDJ6060W
Brand: Philips Pages: 2

Brands by name

Popular brands

Load more brands