Administrator’s Guide for SIP-T5 Series Smart Media Phones
182
Parameters
Permitted Values
Default
Description:
Enables or disables the DSS keys to be assigned with Line type automatically.
0
-Disabled
1
-Enabled
Note:
The number of the DSS keys is determined by the value of the parameter
“account.X.number_of_linekey”.
Web User Interface:
Features->General Information->Auto Linekeys
Phone User Interface:
None
account.X.number_of_linekey
Integer from 1 to
999
1
Description:
Configures the number of DSS keys to be assigned with Line type automatically from the
first unused one (unused one means the DSS key is configured as N/A or Line). If a DSS key
is used, the IP phone will skip to the next unused DSS key.
The order of DSS key assigned automatically is Line Key->Ext Key.
X ranges from 1 to 16 (for SIP-T58V/T58A/T56A)
X is equal to 1 (for CP960)
Example:
account.1.number_of_linekey = 2
Note
: It works only if the value of the parameter “features.auto_linekeys.enable” is set to 1
(Enabled). To assign Ext Key, make sure the expansion module has been connected to the
phone in advance.
Web User Interface:
Account->Advanced->Number of line key
Phone User Interface:
None
To configure auto linekeys feature via web user interface:
1.
Click on
Features
->
General Information
.
2.
Select
Enabled
from the pull-down list of
Auto Linekeys
.
Summary of Contents for CP969
