Yealink CP969, Administrator'S Manual

Page: 775 / 868

Troubleshooting
753

Reset static settings
: All static settings on the phone will be reset.

Reset userdata & local config
: All the local cache data (e.g., userdata, history, directory)
will be cleared. And all configurations saved in the <MAC>-local.cfg configuration file on
the IP phone will be reset.

Reset to factory Setting
: All configurations on the phone will be reset.

Reset build-in SD card
: All the files in the internal SD card will be cleared.
You can reset the IP phone to default factory configurations. The default factory configurations
are the settings that reside on the IP phone after it has left the factory. You can also reset the IP
phone to custom factory configurations if required. The custom factory configurations are the
settings that defined by the user to keep some custom settings after resetting.
Note
How to reset the IP phone to default factory configurations?
To reset the IP phone via web user interface:
1.
Click on
Settings
->
Upgrade
.
2.
Click
Reset to Factory Setting
in the
Reset to Factory Setting
field.
The web user interface prompts the message “Do you want to reset to factory?”.
3.
Click
OK
to confirm the resetting.
The IP phone will be reset to factory sucessfully after startup.
Note Reset of your phone may take a few minutes. Do not power off until the phone starts up
successfully.
Resetting the IP phone to factory settings will delete all configuration information on the phone.
Please backup all the settings before resetting.
The
Reset local settings
/
Reset non-static settings
/
Reset static settings
/
Reset userdata &
local config
option on the web user interface appears only if the value of the parameter
“static.auto_provision.custom.protect” is set to 1.