Yealink CP969, Administrator'S Manual

Page: 47 / 868

Setting Up Your System
25
To configure DHCP via web user interface:
1.
Click on
Network
->
Basic
.
2.
In the
IPv4 Config
block, mark the
DHCP
radio box.
3.
Click
Confirm
to accept the change.
A dialog box pops up to prompt that settings will take effect after a reboot.
4.
Click
OK
to reboot the phone.
To configure DHCP via phone user interface:
1.
Tap
Settings
->
Advanced
(default password: admin) ->
Network
->
WAN Port
->
IPv4
.
2.
Tap the
Type
field.
3.
Tap
DHCP
in the pop-up dialog box.
4.
Tap to accept the change.
The phone prompts you to reboot the phone.
5.
Tap
OK
to reboot the phone.
The settings will take effect after a reboot.
Static DNS
Static DNS address(es) can be configured and used even though DHCP is enabled.
Procedure
Static DNS can be configured using the following methods.
Central Provisioning
(Configuration File)
<y0000000000xx>.c
fg
Configure the static DNS feature
.
Parameter:
static.network.static_dns_enable
<MAC>.cfg Configure static DNS address.