Yealink CP969, Administrator'S Manual

Page: 125 / 868

Setting Up Your System
103
Parameters Permitted Values Default
Configures the access URL of the device certificate.
Example:
static.network.802_1x.client_cert_url = http://192.168.1.10/client.pem
Note:
It works only if the value of the parameter “static.network.802_1x.mode” is set to 2
(EAP-TLS). The format of the device certificate must be *.pem.
Web User Interface:
Network->Advanced->802.1x->Device Certificates
Phone User Interface:
None
To configure the 802.1X authentication via web user interface:
1.
Click on
Network
->
Advanced
.
2.
In the
802.1x
block, select the desired protocol from the pull-down list of
802.1x Mode
.
a)
If you select
EAP-MD5
:
1)
Enter the user name for authentication in the
Identity
field.
2)
Enter the password for authentication in the
MD5 Password
field.
b)
If you select
EAP-TLS
:
1)
Enter the user name for authentication in the
Identity
field.
2)
Leave the
MD5 Password
field blank.
3)
In the
CA Certificates
field, click
Upload
to select and upload the desired CA