Yealink CP969, Administrator'S Manual

Page: 81 / 868

Setting Up Your System
59
Parameters Permitted Values Default
effect.
Web User Interface:
Network->Advanced->CDP->Packet Interval (1~3600s)
Phone User Interface:
Settings->Advanced (default password: admin) ->Network->CDP->Packet Interval
To configure CDP via web user interface:
1.
Click on
Network
->
Advanced
.
2.
In the
CDP
block, select the desired value from the pull-down list of
Active
.
3.
Enter the desired time interval in the
Packet Interval (1~3600s)
field.
4.
Click
Confirm
to accept the change.
A dialog box pops up to prompt that settings will take effect after a reboot.
5.
Click
OK
to reboot the phone.
To configure CDP feature via phone user interface:
1.
Tap
Settings
->
Advanced
(default password: admin) ->
Network
->
CDP
->
CDP Status
.
2.
Tap the
On
radio box in the
CDP Status
field.
3.
Enter the priority value (1-3600s) in the
Packet Interval
field.
4.
Tap to accept the change.
The phone prompts you to reboot the phone.
5.
Tap
OK
to reboot the phone.
The settings will take effect after a reboot.