Yealink CP969, Administrator'S Manual

Page: 279 / 868

Configuring Advanced Features
257
Parameters Permitted Values Default
Phone User Interface:
Settings->Features->Hot Line->Number
features.hotline_delay
Integer from 0 to
10
4
Description:
Configures the waiting time (in seconds) for the IP phone to automatically dial out the
hotline number.
If it is set to 0 (0s), the IP phone will immediately dial out the preconfigured hotline number
when you lift the handset, press the Speakerphone key or tap the line key.
If it is set to a value greater than 0, the IP phone will wait the designated seconds before
dialing out the predefined hotline number when you lift the handset, press the
Speakerphone key or tap the line key.
Note:
Handset and Speakerphone key are not applicable to CP960 IP phones.
Web User Interface:
Features->General Information->Hotline Delay(0~10s)
Phone User Interface:
Settings->Features->Hot Line->Hotline Delay
To configure hotline via web user interface:
1.
Click on
Features
->
General Information
.
2.
Enter the hotline number in the
Hotline Number
field.
3.
Enter the delay time in the
Hotline Delay(0~10s)
field.