Yealink CP969, Administrator'S Manual

Page: 253 / 868

Configuring Advanced Features
231
replace rule template online:
http://support.yealink.com/documentFront/forwardToDocumentFrontDisplayPage . For more
information on obtaining the replace rule template, refer to Obtaining Configuration Files and
Resource Files on page 119 .
When editing a replace rule template file, learn the following:

<DialRule> indicates the start of the template file and </DialRule> indicates the end of the
template file.

When specifying the desired line(s) to apply the replace rule, the valid values are 0 and line
ID. Multiple line IDs are separated by commas.
The following table lists valid values of line ID for each phone model.
Phone Model Values Description
SIP-T58V/T58A/T56A 0~16
0 stands for all lines
1~16 stand for line1~line16
CP960 0, 1
0 stands for all lines
1 stand for line1

At most 100 replace rules can be added to the IP phone.
The expression syntax in the replace rule template is the same as that introduced in the
section
Dial Plan on page 227 .
To customize a replace rule template:
1.
Open the template file using an ASCII editor.
2.
Create replace rules between <DialRule> and </DialRule>.
For example
:
<Data Prefix="2512" Replace="05922512" LineID="1" />
Where:
Prefix="" specifies the numbers to be replaced.
Replace="" specifies the alternate string instead of what the user enters.
LineID="" specifies the desired line(s) for this rule. When you leave it blank or enter 0, this
replace rule will apply to all lines.
If you want to change the replace rule, specify the values within double quotes.