Yealink CP969, Administrator'S Manual

Page: 534 / 868

Administrator’s Guide for SIP-T5 Series Smart Media Phones
512
Parameters Permitted Values Default
Configures the channel of the multicast paging group in the paging list.
If it is set to 0, all the Yealink IP phones running old firmware version (old paging
mechanism) or prior or Yealink IP phones listens to channel 0 or third-party available
devices (e.g., Cisco IP phones) in the paging group can receive the RTP stream.
If it is set to 1 to 25, the Polycom or Yealink IP phones preconfigured to listen to the
channel can receive the RTP stream.
It it is set to 26 to 30, the Yealink IP phones preconfigured to listen to the channel can
receive the RTP stream.
Example:
multicast.paging_address.1.channel = 3
multicast.paging_address.2.channel = 5
Web User Interface:
Directory->Multicast IP->Paging List->Channel
Phone User Interface:
Settings->Features->Paging List->Option->Edit->Channel
Multicast Paging Key
For more information on how to configure the DSS Key, refer to Appendix D: Configuring DSS
Key on page 775 .
Details of Configuration Parameters:
Parameters
Permitted
Values
Default
linekey.X.type/ expansion_module.X.key.Y.type 24
Refer to the
following
content
Description:
Configures a DSS key as a multicast paging key on the IP phone.
The digit
24
stands for the key type
Multicast Paging
.
For line keys:
X ranges from 1 to 27 (for SIP-T58V/T58A/T56A)
X ranges from 1 to 30 (for CP960)
For ext keys:
X ranges from 1 to 3, Y ranges from 1 to 60 (for SIP-T58V/T58A/T56A)
Example: