Yealink CP969, Administrator'S Manual

Page: 443 / 868

Configuring Advanced Features
421
Parameters Permitted Values Default
(Enabled).
Web User Interface:
Features->Intercom->Intercom Tone
Phone User Interface:
Settings->Features->Intercom->Intercom Tone
features.intercom.barge 0 or 1 0
Description:
Enables or disables the IP phone to answer an incoming intercom call while there is already
an active call on the IP phone.
0
-Disabled
1
-Enabled
If it is set to 0 (Disabled), the IP phone will handle an incoming intercom call like a waiting
call while there is already an active call on the IP phone.
If it is set to 1 (Enabled), the IP phone will automatically answer the intercom call while there
is already an active call on the IP phone and place the active call on hold.
Note:
It works only if the values of parameters “features.intercom.allow” and
“call_waiting.enable” are set to 1 (Enabled).
Web User Interface:
Features->Intercom->Intercom Barge
Phone User Interface:
Settings->Features->Intercom->Intercom Barge
To configure intercom via web user interface:
1.
Click on
Features
->
Intercom
.
2.
Select the desired values from the pull-down lists of
Accept Intercom
,
Intercom Mute
,
Intercom Tone
and
Intercom Barge
.
3.
Click
Confirm
to accept the change.