Yealink CP969, Administrator'S Manual

Page: 49 / 868

Setting Up Your System
27
Parameters Permitted Values Default
(On). If you change this parameter, the IP phone will reboot to make the change take effect.
Web User Interface:
Network->Basic->IPv4 Config->Static IP Address->Primary DNS
Phone User Interface:
Settings->Advanced (default password: admin) ->Network->WAN Port->IPv4->Static DNS
(Enabled) ->Primary DNS
static.network.secondary_dns IPv4 Address Blank
Description:
Configures the secondary IPv4 DNS server.
Example:
static.network.secondary_dns = 202.101.103.54
Note
: It works only if the value of the parameter "static.network.static_dns_enable" is set to 1
(On). If you change this parameter, the IP phone will reboot to make the change take effect.
Web User Interface:
Network->Basic->IPv4 Config->Static IP Address->Secondary DNS
Phone User Interface:
Settings->Advanced (default password: admin) ->Network->WAN Port->IPv4->Static DNS
(Enabled) ->Secondary DNS
To configure static DNS address when DHCP is used via web user interface:
1.
Click on
Network
->
Basic
.
2.
In the
IPv4 Config
block, mark the
DHCP
radio box.
3.
In the
Static DNS
block, mark the
On
radio box.
4.
Enter the desired values in the
Primary DNS
and
Secondary DNS
fields.