Yealink CP969, Administrator'S Manual

Page: 585 / 868

Configuring Advanced Features
563
Variable Value Phone Action
AlwaysFwdOff/BusyFwdOff/NoAnswF
wdOff
Deactivate the always/busy/no answer forward
feature for the IP phone.
Note
: It works only if the call forward mode is
Phone, the always/busy/no answer forward
feature will apply to all the accounts on the
phone.
Example
:
http://10.10.20.10/servlet?key=NoAnswFwdOff
ASW/CANCEL/HOLD/UNHOLD:xxx
Answer/end/hold/unhold a call (xxx refers to
the call-id of the active call).
Example
:
http://10.10.20.10/servlet?key=ASW:33093
Note
: To get the call-id of the active call,
configure the action URL:
http(s)://<serverIPAddress>/help.xml?CallId=$
call_id
. For more information, refer to Action
URL on page 540 .
phonecfg=get[&accounts=x][&dnd=x
][&fw=x]
Get firmware version, registration, DND or
forward configuration information.
The valid value of “x” is 0 or 1, 0 means you do
not need to get configuration information. 1
means you want to get configuration
information.
Note
: The valid URI is:
http(s)://<phoneIPAddress>/servlet?phonecfg
=get[&accounts=x][&dnd=x][&fw=x]
Example
:
http://10.10.20.10/servlet?phonecfg=get[&acc
ounts=1][&dnd=0][&fw=1]
Note
The variable value is not applicable to all events. For example, the variable value “MUTE” is only
applicable when the IP phone is during a call.
When authentication is required, you change the URI format. You can enter
“p=login&q=login&username=xxx&pwd=yyy&jumpto=URI&” before the variable “key”. xxx
refers to the login user name and yyy refers to the login password. In addition, you can also use
the following URI format:
http(s)://username:password@<phoneIPAddress>/servlet?key=variable value
or
http(s)://<phoneIPAddress>/servlet?key=variable value&@username:password
.