Yealink CP969, Administrator'S Manual

Page: 434 / 868

Administrator’s Guide for SIP-T5 Series Smart Media Phones
412
Parameter
Permitted
Values
Default
Enables or disables the keep mute feature for the IP phone.
0
-Disabled
1
-Enabled
For SIP-T58V/T58A/T56A IP phones
:
The default value is 0.
For CP960 IP phones
:
The default value is 1.
If it is set to 0 (Disabled), mute feature is automatically deactivated when the active call ends.
If it is set to 1 (Enabled), the mute state can be kept across calls after the mute feature is
activated until you manually deactivate the mute feature or the phone restarts.
Note
: For SIP-T58V/T58A/T56A IP phones, if it is set to 1 (Enabled), you cannot customize
the Mute key. It works only if the value of the parameter “features.allow_mute” is set to 1
(Enabled).
Web User Interface:
None
Phone User Interface:
None
Intercom
Intercom allows establishing an audio conversation directly. The IP phone can answer intercom
calls automatically.
Intercom can be also used to monitor a specific user for status changes on IP phones. For
example, you can configure an intercom key on a supervisor’s phone to monitor the IP phone
user status (busy or idle). When the monitored user places a call, a busy indicator on the
supervisor’s phone indicates that the user’s phone is in use. When the monitored user is idle, the
supervisor can tap the intercom key to automatically connect with a preconfigured target
extension for outgoing intercom calls. When the monitored user receives an incoming call, the
supervisor can tap the intercom key to pick up the call directly. To pick up the call, you have to
configure the directed call pickup code in advance. You can configure the directed call pickup
code when configuring an intercom key.
IP phones support this feature using a SUBSCRIBE/NOTIFY mechanism as specified in RFC 3265 .
And this feature depends on support from a SIP server.
Icon indicator
(configured as an intercom key)
Icons Description
Intercom idle state