9-192
1596
45-1
C
D
RE-CHO-A1
11
FS10
0
2
An attempt was made to obtain
the step that used a local position
type variable. (The step with local
position type variable cannot be
fetched. Example: MOVJ LP000
VJ=25.00)
Setting error
(1)Check the following settings.
·Check the settings for the GETPOS instruction.
3
The specified step did not exist.
Setting error
(1)Check the following settings.
·Check the settings for the GETPOS instruction.
4628
WRITE VARIABLE NO.
MULTI SETTING
Sub Code: Duplicated variable
number
Setting error
(1)Check the following settings.
·Check the settings for the written destination variable numbers.
4629
GROUP CHANGE
ERROR
1
The group change parameter was
invalid.
Setting error
(1)Check the following settings.
·Validate the group change parameter.
2
The GRPCHG instruction was
executed while the external axis
motor was servo ON.
Setting error
(1)Check the following settings.
·Execute the GRPCHG instruction when the external axis motor was servo
OFF.
3
The GRPCHG instruction was
executed in unchuck status.
Setting error
(1)Check the following settings.
·Execute the GRPCHG instruction in chuck status.
4
The group identification signal
was not received.
Setting error
(1)Check the following settings.
·Check the settings for group identification signal.
5
The specified control group
number and the group
identification number were
unmatched.
Setting error
(1)Check the following settings.
·Check the settings for the specified control group number.
6
The encoder PG power supply
was OFF when the GRPCHG was
ON.
Setting error
(1)Check the following settings.
·Turn ON the encoder PG power supply when GRPCHG is ON.
7
The encoder PG power supply
was ON when the GRPCHG was
OFF.
Setting error
(1)Check the following settings.
·Turn OFF the encoder PG power supply when GRPCHG is OFF.
8
The control group that
corresponded to the received
group identification signal did not
exist.
Setting error
(1)Check the following settings.
·Check the settings for group identification signal.
4632
UNDEFINED LNR
SCALE FILE
Sub Code: Linear scale
characteristic file number
Setting error
(1)Check the following settings.
·Complete the settings for the linear scale condition file.
4635
CANNOT EXECUTE
COMMON JOB
Sub Code: The related control-
group
Setting error
(1)Check the following settings.
·Check the settings for control group specified by the CALL instruction.
Alarm
Number
Alarm Name
Sub
Code
Meaning
Cause
Remedy
294 of 348