YASKAWA CR700, Technical Manual

Page: 720 / 886

11.8 H: Terminal Functions
720 YASKAWA SIEPC71061723A YASKAWA AC Drive CR700 Technical Manual
■
2F: Maintenance Notification
Setting Value Function Description
2F Maintenance Notification
The terminal activates when drive components are at their estimated maintenance period.
Tells the user about the maintenance period for these items:
• IGBT
• Cooling fan
• Capacitor
• Soft charge bypass relay
Note:
Refer to “ Alarm Outputs for Maintenance Monitors ” for more information.
■
30: During Torque Limit
Setting Value Function Description
30 During Torque Limit
The terminal activates when the torque reference is the torque limit set with L7 parameters , H3-02, H3-06, or H3-10 [MFAI
Function Selection] .
Note:
Refer to “ L7: Torque Limit ” for more information.
■
33: Zero Servo Complete
Setting Value Function Description
33 Zero Servo Complete
The terminal activates when positioning in the range set with b9-02 [Zero Servo Completion Window] completes after sending
the Zero-Servo command.
Note:
Refer to “ b9: Zero Servo ” for more information.
■
37: During Frequency Output
Setting Value Function Description
37 During Frequency Output
The terminal activates when the drive outputs frequency.
ON : The drive outputs frequency.
OFF : The drive does not output frequency.
Note:
The terminal turns off in any of these conditions:
• During Stop
• During baseblock
• During DC Injection Braking (initial excitation)
Figure 11.68 Active Frequency Output Time Chart
■
39: Watt Hour Pulse Output
Setting Value Function Description
39 Watt Hour Pulse Output
Outputs the pulse that shows the watt hours.
V/f CL-V/f OLV CLV AOLV
V/f CL-V/f OLV CLV AOLV
V/f CL-V/f OLV CLV AOLV
V/f CL-V/f OLV CLV AOLV
V/f CL-V/f OLV CLV AOLV