YASKAWA CR700, Technical Manual, Page: 149 / 886

Startup
Procedure
and
Test
Run
3
3.4 Keypad Operation
YASKAWA SIEPC71061723A YASKAWA AC Drive CR700 Technical Manual 149
◆
Set Custom Monitors
You can select and register a maximum of 12 monitoring items to regularly show on the keypad.
This procedure shows how to set the motor speed to [Custom Monitor 1].
1.
Push (Home) to show the HOME screen.
Note:
•The keypad will show [Home] in the top right corner when the HOME screen is active.
•If the keypad does not show [Home] on
, push (Back) to show [Home] on .
2.
Push (Menu).
3.
Push or to select [Monitors], then push .
4.
Push or to select [Custom Monitor], then push (Setup).
5.
Push or to select [Custom Monitor 1], then push .
6.
Push or to select the monitor number to register, then push .
Set the x-xx part of monitor Ux-xx . For example, to show monitor U1-05 , set it to “105” as shown in this
figure.