YASKAWA CR700, Technical Manual

Page: 626 / 886

11.5 d: References
626 YASKAWA SIEPC71061723A YASKAWA AC Drive CR700 Technical Manual
■
d1-08: Reference 8
No.
(Hex.)
Name Description
Default
(Range)
d1-08
(0287)
RUN
Reference 8
Sets the frequency reference in the units from o1-03 [Frequency Display Unit Selection .
0.00 Hz
(0.00 - 590.00 Hz)
Note:
• The upper limit value changes when the E1-04 [Maximum Output Frequency] and d2-01 [Frequency Reference Upper Limit] values
change.
• Parameter d1-08 sets the frequency reference of Multi-Step Speed 8.
■
d1-09: Reference 9
No.
(Hex.)
Name Description
Default
(Range)
d1-09
(0288)
RUN
Reference 9
Sets the frequency reference in the units from o1-03 [Frequency Display Unit Selection .
0.00 Hz
(0.00 - 590.00 Hz)
Note:
• On drives with software versions PRG: 01021 and later, this function is enabled.
The “ PRG ” column on the nameplate on the right side of the drive identifies the software version. You can also use
U1-25
[SoftwareNumber FLASH]
to identify the software version.
• The upper limit value changes when the E1-04 [Maximum Output Frequency] and d2-01 [Frequency Reference Upper Limit] values
change.
• This parameter sets the frequency reference of Multi-Step Speed 9.
■
d1-10: Reference 10
No.
(Hex.)
Name Description
Default
(Range)
d1-10
(028B)
RUN
Reference 10
Sets the frequency reference in the units from o1-03 [Frequency Display Unit Selection .
0.00 Hz
(0.00 - 590.00 Hz)
Note:
• On drives with software versions PRG: 01021 and later, this function is enabled.
The “ PRG ” column on the nameplate on the right side of the drive identifies the software version. You can also use U1-25
[SoftwareNumber FLASH] to identify the software version.
• The upper limit value changes when the E1-04 [Maximum Output Frequency] and d2-01 [Frequency Reference Upper Limit] values
change.
• This parameter sets the frequency reference of Multi-Step Speed 10.
■
d1-11: Reference 11
No.
(Hex.)
Name Description
Default
(Range)
d1-11
(028C)
RUN
Reference 11
Sets the frequency reference in the units from o1-03 [Frequency Display Unit Selection .
0.00 Hz
(0.00 - 590.00 Hz)
Note:
• On drives with software versions PRG: 01021 and later, this function is enabled.
The “ PRG ” column on the nameplate on the right side of the drive identifies the software version. You can also use
U1-25
[SoftwareNumber FLASH]
to identify the software version.
• The upper limit value changes when the E1-04 [Maximum Output Frequency] and d2-01 [Frequency Reference Upper Limit] values
change.
• This parameter sets the frequency reference of Multi-Step Speed 11.
■
d1-12: Reference 12
No.
(Hex.)
Name Description
Default
(Range)
d1-12
(028D)
RUN
Reference 12
Sets the frequency reference in the units from
o1-03 [Frequency Display Unit Selection
.
0.00 Hz
(0.00 - 590.00 Hz)
V/f CL-V/f OLV CLV AOLV
V/f CL-V/f OLV CLV AOLV
V/f CL-V/f OLV CLV AOLV
V/f CL-V/f OLV CLV AOLV
V/f CL-V/f OLV CLV AOLV