Xilinx ChipScope Pro, User Manual

Page: 36 / 226

36 www.xilinx.com ChipScope Pro Software and Cores User Guide
UG029 (v14.3) October 16, 2012
Chapter 3: Using the ChipScope Pro Core Inserter
Create CDC Project Step
The Create CDC Project step of the command line ChipScope Pro Core Inserter flow is used
to create an empty skeleton CDC project file, as shown in
Figure 3-2 . The command line
signature for this step is:
inserter -create <project.cdc>
Note:
This step does not bring up the ChipScope Pro Core Inserter graphical user interface (GUI).
X-Ref Target - Figure 3-1
Figure 3-1: Command Line Core Inserter Flow
S t a rt
Done
De s ign Entry
De s ign S ynthe s i s
Device Progr a mming
Chip S cope Pro Core In s erter
Cre a te CDC Project
Chip S cope Pro Core
In-Circ u it Verific a tion
Chip S cope Pro Core In s erter
Edit CDC Project
Chip S cope Pro Core In s erter
In s ert Core s
ngd bu ild
m a p
p a r
b itgen
De s ign Implement a tion
in s erter_cmd_line_flow_ch 3 _0 3 _121 3 06
X-Ref Target - Figure 3-2
Figure 3-2: Create CDC Project Step
in s erter_cre a te_mode_ch 3 _04_121 3 06
Chip S cope Pro
Core In s erter
Project.cdc