180
ChipScope Pro Software and Cores User Guide
UG029 (v14.3) October 16, 2012
Chapter 5:
ChipScope Engine Tcl Interface
Returns
A bitfield containing the resulting status of the configuration. The bitfield can be logically
AND'ed with one or more of the following values to check the corresponding status
information:
$CSE_INTERNAL_DONE_HIGH_STATUS
$CSE_EXTERNAL_DONE_HIGH_STATUS
$CSE_CRC_ERROR_STATUS
$CSE_BITSTREAM_READ_ENABLED
$CSE_BITSTREAM_WRITE_ENABLED
An exception is thrown if the command fails.
Example
Configure the third device in the JTAG chain with the file mydesign.bit.
%set filename "mydesign.bit"
%set fp [open $filename r]
%fconfigure $fp -translation binary -blocking 1
%set fileData [read $fp]
%close $fp
%set configStatus [::chipscope::csefpga_configure_device $handle 2
"bit" $CSE_DEFAULT_OPTIONS $fileData [file size $filename]
"progressCallBack"]
Back to list of all CseFpga Tcl Commands
verify_internal_done
verify_internal_done
=true,
verify_internal_done
=false
Read internal device
DONE
status after configuration from the
device JTAG instruction register. Default is
"
verify_internal_done=true
".
verify_external_done
verify_external_done
=true,
verify_external_done
=false
Read external device
DONE
status after configuration from the
configuration status register. If you tie
DONE
device package
pins together, the
DONE
status is a logical
AND
of all device
DONE
pins which have their
DONE
device package pins tied
together. Default is
"verify_external_done=false"
.
verify_crc
verify_crc=true,
verify_crc=false
Read CRC status after configuration from the device
configuration status register. Default is
"verify_crc=false"
.
use_assigned_config_
data
use_assigned_config_
data=true,
use_assigned_config_
data=false
Use the configuration and/or mask data provided by
::chipscope::csefpga_assign_config_data_to_de
vice
or
::chipscope::csefpga_assign_config_data_file_
to_device.
Default is
"use_assigned_config_data=false"
.
Table 5-47:
Configuration Options
(Cont’d)
Option Name
Values
Description
