Xerox Wide Format 6705 System, User Manual

Page: 272 / 363

8
Problem Solving
8.12 Finding More
272
8.12 Finding More
Refer to these subsections.
 To Increase Duration Before Auto Clear.......................................................................................................................................p. 272
 To Increase Duration Before Energy Saver Mode Turns On (Changing Energy Saver Timers) ...............................p. 274
 To Customize the Default Screen ....................................................................................................................................................p. 275
 To Display the Auto Mode Screen by Default.............................................................................................................................p. 276
 To Go to the Target Screen with a Single Button Press (Assigning the Custom Buttons).........................................p. 277
 To Change the Default Output File Format of Scanned Data .............................................................................................p. 278
 To Calibrate Gaps Appearing on the Copied or Scanned Output.......................................................................................p. 279
8.12.1 To Increase Duration Before Auto Clear
When no operation is performed for a certain period, the machine is automatically reset (auto clear).
The following describes how to increase the duration of time before auto clear.
Steps
St
1.
Press the <Log In/Out> button on the control panel.
2.
Enter the user ID of the system administrator, by using
the numeric keypad or the keyboard displayed on the
screen, and press [Enter].
Note

By factory default, the User ID is "11111".
1 2 3
4 5 6
7 8 9
0
＃
C
Services Home
Copy (Not In Use) Review
Job Status
Machine Status
Dial Pause Speed Dial
ABC DEF
GHI JKL MNO
PQRS TUV WXYZ
Interrupt
Start
Stop
Clear All
Log In / Out
Energy Saver
<Log In / Out> button