manualshive.com logo in svg

Xerox Wide Format 6705 System, User Manual

Share
Download
Xerox Wide Format 6705 System User Manual Download Page 279

Problem Solving

8

279

8.12 Finding More

8.12.7

To Calibrate Gaps Appearing on the Copied or Scanned Output 

If you find gaps on the copied or scanned output, you will need to calibrate the gaps between the scanning sensors 
using the calibration chart that came with the machine. 

Steps

St

 1.

Press [Scan Sensor Gap Calibration] on the [Services Home] screen.

 2.

Press [Auto Adjust].

 3.

Load the calibration chart face down on the document 
table, and press the <Start> button on the control panel.

The gaps between scanning sensors are automatically 
calibrated.

Summary of Contents for Wide Format 6705 System












































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands