manualshive.com logo in svg

Xerox Wide Format 6705 System, User Manual

Share
Download
Xerox Wide Format 6705 System User Manual Download Page 18

 Safety Notes

18

Electrical Safety

WARNING

This product shall be operated by the power source as indicated on the product's data plate. Consult your local 
power company to check if your power source meets the requirements.

WARNING: Connect this product to a protective earth circuit.

This product is supplied with a plug that has a protective earth pin. The plug fits only into an earthed elec-
trical outlet. This is a safety feature. If the plug doesn't fit to the outlet, contact an electrician to replace 
the outlet to avoid risk of electric shock. Never use an earthed adapter plug to connect the product to the 
electrical outlet that has no earth connection terminal.

Improper connection of a grounding conductor may cause electric shock.

Plug the power cord directly into a grounded electrical outlet.  To prevent overheat and a fire accident, do 
not use an extension cord, a multi-plug adaptor or a multiple connector. Consult your local Xerox 
representative to check if an outlet is grounded.

Connect this product to a branch circuit or an outlet that has larger capacity than the rated ampere and 
voltage of this product. See the data plate on the rear panel of this product for its rated ampere and 
voltage.

Never touch the power cord with wet hands.  It may cause electric shock.

Do not put an object on the power cord.

Always keep the plug connection free of dust. The dusty and damp environment may bring about minute 
electric current in a connector. It may generate heat and eventually cause a fire accident.

To avoid the risk of electric shock and a fire accident, only use the power cord supplied with this product or 
the ones designated by Xerox.
The power cord is exclusive use for this product. Do not use it for any other product.

Do not damage or alter the power cord. Damage and alteration may generate heat and eventually cause 
electric shock or a fire accident.

If the power cord is damaged or insulated wires are exposed, contact your local Xerox representative for 
its replacement. Do not use a damaged or uninsulated cord to avoid the risk of electric shock and a fire 
accident.

Summary of Contents for Wide Format 6705 System












































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands