Xerox Wide Format 6705 System, User Manual

Page: 72 / 363

1
Before Using the Machine
1.15 About Originals
72
1.15 About Originals
1.15.1 Usable Originals
Originals that meet the following conditions can be used.
*1 When the U-turn output guide is installed
*2 It is possible to scan a flat and hard original (styrene board, heavy paper) whose thickness exceeds 0.2 mm, up to 1 mm thick.
The flat and hard original must be supported by your hand while scanning. However, the document transportation and the
output image quality is not guaranteed.
When scanning a thick original whose thickness is between 1 and 5 mm, the optional Heavy Document KIT is used. For
information on how to do this, refer to "When Scanning Thick Documents" (p. 81).
1.15.2 Originals that Require the Use of the Document Carrier (Optional)
Use the document carrier for the following types of originals.
 Documents that have been perforated, creased, heavily curled, or have holes
 Documents that are stapled together
 Documents with glue, or adhesive tape or filing strips.
1.15.3 Precautions When Handling Originals
Observe the following precautions when handling originals.
 The scanning area may become soiled if documents contaminated by glue or adhesive tape, or documents on
which correction fluid has been used are placed in the scanner. Be very careful when using stick-type glue or glue
spray.
Soiling of the scanning area can cause black lines on copies.
 Do not use documents that have been folded, wrinkled, perforated or had holes punched in them. It may result in
paper jams and tearing. When using originals that have been folded, wrinkled, perforated or had holes punched in
them, the document carrier (optional) must be used.
 When rolled originals are to be used, ensure that the diameter of the rolled original is 40 mm or larger. Rolled
originals with a diameter of less than 40 mm must be flattened out at the lead edge.
 When scanning thick originals, hold them with your hands while scanning them.
Original Size Paper Weight
Original width
176 - 914.4 mm (Maximum allowable width: 945 mm)
Original length
210 - 15,000 mm (Maximum length)
When ejecting frontward
0.05 - 0.2 mm*
1
When ejecting rearward
0.05 - 5 mm*
2