Xerox DP N24, System Administrator Manual

Page: 143 / 336

Novell Menu
Chapter 3: Using the Control Panel
❖
3-79
Primary Server
Set the name of the Primary file server (a
name of 2 to 47 characters in length). The
available values are:
A - Z, 0 - 9, hyphen (-) and underscore (_)
Null*
For this item (after Step 3), Item Up
moves the cursor to the right through the
displayed Primary Server name and Item
Down
moves the cursor to the left.
This allows you to change characters
within the string rather than having to
reenter the entire string.
With the cursor displayed under a
character, Value Up
increments the
value of that character and Value
Down
decrements the value.
From any cursor position, you can
null out (delete) to the end of the
string by selecting the space
character with Value Up
or
Value Down and then
pressing Enter .
1. Press Menu Up or Menu
Down until you see:
M e n u s
N o v e l l M e n u
2. Press Item Up or Item
Down until you see:
N o v e l l M e n u
P r i m a r y S e r v e r
3. Press Value Up or Value
Down . You will see:
P r i m a r y S e r v e r =
xxx...xxx
4. Press Value Up or Value
Down to change the value of
the character above the cursor. The
value is incremented or
decremented by 1 each time the
key is pressed. Holding down
Value Up
or Value Down
causes continuous scrolling
through the values.
P r i m a r y S e r v e r =
xxx...xxx
5. To change other characters in the
Primary Server name, press Item
Up
or Item Down to
scroll right or left respectively
through the character string, then
press Value Up
or Value
Down to change the value of
the character above the cursor (as
in Step 4).
P r i m a r y S e r v e r =
xxx...xxx
6. When you have completed setting
the Primary Server Name, press
Enter
. You will see:
N o v e l l M e n u
P r i m a r y S e r v e r
7. Press On Line . You will see:
R e a d y
Table 3.15 Novell Menu functions (continued)
Menu Item and Function Keystrokes Display
Table 3.15 Page 4 of 6