Xerox DP N24, System Administrator Manual

Page: 150 / 336

Test Menu
3-86
❖
DP N24, N32 and N40 System Administrator Guide
Hex Mode
Set print output as hexadecimal codes
instead of normal print data. The available
values are:
Off
On
1. Press Menu Up or Menu
Down until you see:
M e n u s
T e s t M e n u
2. Press Item Up or Item
Down until you see:
T e s t M e n u
H e x M o d e
3. Press Value Up or Value
Down until you see:
H e x M o d e =
New Value
4. Press Enter . You will see:
T e s t M e n u
H e x M o d e
5. Press On Line . You will see: R e a d y
Restart Printer
Reboot the printer without powering it off
and powering it on again. The available
values are:
Yes
No*
You must select
Yes
and press
Enter for this function to take
effect.
Power on diagnostics are bypassed.
1. Press Menu Up or Menu
Down until you see:
M e n u s
T e s t M e n u
2. Press Item Up or Item
Down until you see:
T e s t M e n u
R e s t a r t P r i n t e r
3. Press Value Up or Value
Down until you see:
R e s t a r t P r i n t e r =
New Value
4. Press Enter . You will see: T e s t M e n u
R e s t a r t P r i n t e r
5. Press On Line . You will see:
R e a d y
Table 3.16 Test Menu functions
Menu Item and Function Keystrokes Display
Table 3.16 Page 4 of 4