manualshive.com logo in svg

Xerox DP N24, System Administrator Manual

Share
Download
Xerox DP N24 System Administrator Manual Download Page 70

Control Panel Features

3-6

❖

DP N24, N32 and N40 System Administrator Guide

Menu Up

Takes the printer offline and displays the first menu (if not already in the Menu system). 

• Press this key repeatedly to scroll through the menus from bottom to top.

• If a higher priority message displays, it may preempt menu navigation.

• Menu scrolling is available without being offline. Scrolling wraps if the displayed menu is the 

first menu.

• If an item, value or action displays, pressing this key returns to the top of the current menu and 

removes the display of the item, value or action.

• If not in the Menu system, pressing this key enters the Menu system and displays the first 

menu.

• If in the Password Menu, and the display indicates

 

E n t e r   P a s s w o r d

, pressing this 

key causes a password digit “1” to be entered.

Menu Down

Takes the printer offline and displays the last menu (if not already in the Menu system).

• Pressing this key repeatedly scrolls through the menus from top to bottom.

• If a higher priority message displays, it may preempt menu navigation.

• Menu scrolling is available without going offline. Menu scrolling wraps if the displayed menu 

is the last menu.

• If not in the Menu system, pressing this key enters the Menu system and displays the last menu.

• If in the Password Menu, and the display indicates

 

E n t e r   P a s s w o r d

, pressing this 

key causes a password digit “5” to be entered.

Item Up

When in the Menu system, scrolls through the items in the current menu from bottom to top. 
When an address value is displayed (such as Ethernet IP Address), pressing this key moves the 
cursor through the value to the right (so that you can change characters within a string rather than 
having to reenter the entire string).

• If a higher priority message displays, it may preempt menu navigation.

• Scrolling wraps if the displayed item is the first item. 

• Pressing this key returns to the current item in the current menu and removes the value from the 

display.

• If not in the Menu system, this key is ignored.

• If in the Password Menu, and the display indicates

 

E n t e r   P a s s w o r d

, pressing this 

key causes a password digit “2” to be entered.

Table 3.2

Control Panel keys and their functions (continued)

Key

Description

Table 3.2 Page 2 of 4

Summary of Contents for DP N24

















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands