Xerox DP N24, System Administrator Manual

Page: 167 / 336

Downloading Fonts and Macros
Chapter 5: Using the Hard Disk Drive / Downloading Fonts and Jobs
❖
5-5
The following is a sequence of commands that can be sent to the
DP N40 to download a macro to the disk. In this example, the
macro is named “a_macro.”
In this example:
• <ESC>%-12345X is the PJL UEL command which starts this
sequence.
• @PJL<CR><LF> is the mandatory PJL command following the
UEL command.
• @PJL FSDOWNLOAD... downloads a macro of 29 bytes
named “a_macro.”
The phrase “This is the macro” is positioned at x=900 and
y=1500 by this macro.
• <ESC>%-12345X is the UEL command which ends this
sequence.
Executing this macro requires the following PCL sequence:
Notes:
1. The macro ID must be the same case as in the original
download command.
2. The byte count (after the “n” and before the “w”) must equal
the ID byte count plus 1.
<ESC>%-12345X @PJL<CR><LF>
@PJL FSDOWNLOAD FORMAT:BINARY NAME =”0:\pcl\macros\a_macro”
SIZE=29<CR><LF>
<ESC>*p900x1500YThis is the macro <ESC>%-12345X
<ESC>&n8W<HEX’04’>a_macro<CR,LF> Sets the current macro ID to the string ID
“a_macro”
<ESC>&n8W<HEX’05’>a_macro<CR,LF> Associates the current macro ID with the supplied
string ID
<ESC>&f<HEX’02’>x<CR,LF> Executes this macro