Xerox DP N24, System Administrator Manual

Page: 93 / 336

PCL Menu
Chapter 3: Using the Control Panel
❖
3-29
Form Length
Set the number of lines per page used in
PCL. The available values are:
005 - 128 (60* USA) (64* Europe)
Form Length is automatically adjusted
when Paper Size is changed. For example,
setting Paper Size to
A4 adjusts Form
Length to
64
automatically. Setting Paper
Size to Letter adjusts Form Length
to
60
. Whenever Paper Size is changed,
Form Length is recalculated using the
formula: Form Length = ((logical page
length in inches - 1 inch) * 6).
The Form Length value changes
incrementally by 1 each time either Value
Up
or Value Down is pressed.
Holding down Value Up or Value
Down causes continuous scrolling
through the Form Length values.
The value of this setting after performing
a Reset Menus depends on the value of the
Defaults setting.
1. Press Menu Up or Menu
Down until you see:
M e n u s
P C L M e n u
2. Press Item Up or Item
Down until you see:
P C L M e n u
F o r m L e n g t h
3. Press Value Up or Value
Down until you see:
F o r m L e n g t h =
New Value
4. Press Enter . You will see:
P C L M e n u
F o r m L e n g t h
5. Press On Line . You will see: R e a d y
Table 3.8 PCL Menu functions (continued)
Menu Item and Function Keystrokes Display
Table 3.8 Page 3 of 4