Xerox DP N24, System Administrator Manual

Page: 155 / 336

Reset Menu
Chapter 3: Using the Control Panel
❖
3-91
Init Disk
Initialize the Hard Disk Drive. The
available values are:
Yes
No*
This function is ignored if the disk is
locked (write protected) via a PJL or
SNMP command.
1. Press Menu Up or Menu
Down until you see:
M e n u s
R e s e t M e n u
2. Press Item Up or Item
Down until you see:
R e s e t M e n u
I n i t D i s k
3. Press Value Up or Value
Down until you see:
I n i t D i s k =
Y e s
4. Press Enter . You will see:
R e s e t M e n u
I n i t D i s k
5. Press On Line . You will see: R e a d y
Disk Format
Format the Hard Disk Drive. The
available values are:
Yes
No*
This function is ignored if the disk is
locked (write protected) via a PJL or
SNMP command.
1. Press Menu Up or Menu
Down until you see:
M e n u s
R e s e t M e n u
2. Press Item Up or Item
Down until you see:
R e s e t M e n u
D i s k F o r m a t
3. Press Value Up or Value
Down until you see:
D i s k F o r m a t =
Y e s
4. Press Enter . During
formatting, you will see:
D i s k F o r m a t
P l e a s e W a i t . . .
5. When the formatting is complete,
you will see:
R e a d y
Table 3.17 Reset Menu functions
Menu Item and Function Keystrokes Display
Table 3.17 Page 4 of 4