Xerox DP N24, System Administrator Manual

Page: 183 / 336

Control Panel Messages
Chapter 6: Troubleshooting
❖
6-9
C h e c k T o n e r
C a r t r i d g e
The Toner Cartridge is not seated correctly.
ACTION: Reseat the Toner Cartridge. See Appendix B: Maintaining the Printer for
Toner Cartridge installation instructions.
Clear Area A
Clear Env/Bypass
A paper jam has occurred in Area A.
ACTION: Clear the Envelope Feeder or the Bypass Feeder. Then reseat Tray 1.
Clear Area A
Reset Tray 1
A paper jam has occurred in Area A.
Use one of the following procedures to clear Area A:
• “Clearing Area A (No Duplex Module)” (page 6-30).
• “Clearing Area A (With Duplex Module)” (page 6-32).
Then reseat Tray 1.
Clear Area B
Reset Tray 2
A paper jam has occurred in Area B.
Use the procedure:
• “Clearing Area B” (page 6-34).
Then reseat Tray 2.
Clear Area C
Reset Tray 4
A paper jam has occurred in Area C.
Use the procedure“Clearing Area C” (page 6-34) to clear Area C.
Then reseat Tray 4.
Clear Area C
Reset Tray 5
A paper jam has occurred in Area C.
Use the procedure“Clearing Area C” (page 6-34) to clear Area C.
Then reseat Tray 5.
Table 6.2 Control Panel messages and corrective actions (continued)
Message Description/Corrective Action
Table 6.2 Page 5 of 19