Xerox DP N24, System Administrator Manual

Page: 130 / 336

Token Ring Menu
3-66
❖
DP N24, N32 and N40 System Administrator Guide
NetBEUI Enable
Enable or disable the NetBEUI protocol.
The available values are:
On*
Off
1. Press Menu Up or Menu
Down until you see:
M e n u s
T o k e n R i n g M e n u
2. Press Item Up or Item
Down until you see:
T o k e n R i n g M e n u
N e t B E U I E n a b l e
3. Press Value Up or Value
Down until you see:
N e t B E U I E n a b l e =
New Value
4. Press Enter . You will see:
T o k e n R i n g M e n u
N e t B E U I E n a b l e
5. Press On Line . You will see:
R e a d y
NetBEUI PDL
Set the default emulation for the NetBEUI
protocol. The available values are:
Auto*
PCL
PostScript
1. Press Menu Up or Menu
Down until you see:
M e n u s
T o k e n R i n g M e n u
2. Press Item Up or Item
Down until you see:
T o k e n R i n g M e n u
N e t B E U I P D L
3. Press Value Up or Value
Down until you see:
N e t B E U I P D L =
New Value
4. Press Enter . You will see: T o k e n R i n g M e n u
N e t B E U I P D L
5. Press On Line . You will see: R e a d y
Table 3.14 Token Ring Menu functions (continued)
Menu Item and Function Keystrokes Display
Table 3.13 Page 4 of 12