Xerox DP N24, System Administrator Manual

Page: 166 / 336

Downloading Fonts and Macros
5-4
❖
DP N24, N32 and N40 System Administrator Guide
FSDOWNLOAD
Command
The FSDOWNLOAD command is used to download fonts or
macros to the DP N40 file system. If a file with the same name
exists, the downloaded file overwrites it.
Syntax @PJL FSDOWNLOAD FORMAT:BINARY [SIZE=int] [NAME = “ pathname ”] [<CR>] <LF>
<binary data><ESC>%-12345X
Parameters Parameter Functional Range Default
SIZE= integer 0 to 2
31
- 1 N/A
NAME=” pathname ” ASCII 01 thru 255 N/A
SIZE = integer — The size variable indicates the number of bytes in the file to be downloaded.
The size indicates the number of bytes immediately following the <LF> to the next UEL
command.
NAME = “pathname” — where “ pathname ” = 0:\PCL\FONTS\<fontname> to download a font
named “fontname” to the DP N40 or = 0:\PCL\MACROS\<macroname> to download a macro
named “macroname” to the DP N40. “Fontname/macroname” can be any combination of up to
512 alphanumeric characters.
<binary data> — This is the binary file data to be downloaded, such as font files and macro data.
Use of 1 rather than 0 in the “pathname” will download the font or macro to the Flash
RAM rather than to the hard drive.