Xerox DP N24, System Administrator Manual

Page: 96 / 336

PostScript Menu
3-32
❖
DP N24, N32 and N40 System Administrator Guide
Table 3.9 PostScript Menu functions
Menu Item and Function Keystrokes Display
Print Errors
Print an error page when a PostScript
error occurs. The available values are:
Off*
On
1. Press Menu Up or Menu
Down until you see:
M e n u s
P o s t S c r i p t M e n u
2. Press Item Up or Item
Down until you see:
P o s t S c r i p t M e n u
P r i n t E r r o r s
3. Press Value Up or Value
Down until you see:
P r i n t E r r o r s =
New Value
4. Press Enter . You will see:
P o s t S c r i p t M e n u
P r i n t E r r o r s
5. Press On Line . You will see: R e a d y
Binary PS
Enable or disable the binary mode of
PostScript. The available values are:
Off*
On
The parameter applies to all protocols and
interfaces except the following: Parallel,
Serial, EtherTalk, TokenTalk. EtherTalk
and TokenTalk are always set to Binary
mode. Parallel and Serial cannot be set to
Binary mode.
1. Press Menu Up or Menu
Down until you see:
M e n u s
P o s t S c r i p t M e n u
2. Press Item Up or Item
Down until you see:
P o s t S c r i p t M e n u
B i n a r y P S
3. Press Value Up or Value
Down until you see:
B i n a r y P S =
New Value
4. Press Enter . You will see: P o s t S c r i p t M e n u
B i n a r y P S
5. Press On Line . You will see:
R e a d y