Xerox DP N24 System Administrator Manual Download Page 32

Page: 32 / 336

Installing the Printer

1-24

❖

DP N24, N32 and N40 System Administrator Guide

A Paper Size Label card can be found in each

tray. Insert the correct paper size label into the

paper size slot on the front of the tray, then

push the tray all the way back into the printer

until it latches.

For complete paper size and loading
information, refer to Chapter 2: Paper
Handling.

Repeat the paper loading steps for the other

paper tray(s).

If you have other options to install, refer to

Appendix C: Installing and Removing Printer

Options for instructions. Otherwise, you can
proceed to the next step and complete the

installation.

Attach the interface cable from your host

computer or network.

For 110 V installation, go to Step 32.

For 220 V installation, go to Step 33.

Summary of Contents for DP N24

















































































































































































































































































































































Search results

Summary of Contents for DP N24

Reviews:

Brands by name

Popular brands

Xerox DP N24, System Administrator Manual

Search results

Summary of Contents for DP N24

Reviews:

Brands by name

Popular brands