Xerox DP N24, System Administrator Manual

Page: 154 / 336

Reset Menu
3-90
❖
DP N24, N32 and N40 System Administrator Guide
Demo Mode
Place the printer in the demo mode. The
available values are:
Yes
No*
With the printer in demo mode, different
factory-installed demo pages can be
printed by using the eight Control Panel
keys to select the type of demo page and
the number of copies.
Once Demo Mode is selected, the printer
reenters this state automatically every
time the power is cycled.
Demo Mode can be exited by Powering
On the N40 while holding down the
Online Key and the Enter Key.
1. Press Menu Up or Menu
Down until you see:
M e n u s
R e s e t M e n u
2. Press Item Up or Item
Down until you see:
R e s e t M e n u
D e m o M o d e
3. Press Value Up or Value
Down until you see:
D e m o M o d e =
Y e s
4. Press Enter . You will see:
R e s e t M e n u
D e m o M o d e
5. Press On Line . You will see: R e a d y
Delete Jobs
Delete all Secure jobs from the hard disk.
The available values are:
Yes
No*
1. Press Menu Up or Menu
Down until you see:
M e n u s
R e s e t M e n u
2. Press Item Up or Item
Down
until you see:
R e s e t M e n u
D e l e t e J o b s
3. Press Value Up or Value
Down
until you see:
D e l e t e J o b s =
Y e s
4. Press Enter . You will see:
R e s e t M e n u
D e l e t e J o b s
5. Press On Line . You will see:
R e a d y
Table 3.17 Reset Menu functions
Menu Item and Function Keystrokes Display
Table 3.17 Page 3 of 4