Xerox DP N24, System Administrator Manual

Page: 49 / 336

Loading Paper
Chapter 2: Paper Handling
❖
2-11
Using the 50 Sheet
Bypass Feeder
The DP N40’s 50 Sheet Bypass Feeder holds up to 50 sheets of 20
lb (80 g/m
2
) paper. Refer to the section “Selecting Paper”
(page 2-2) for acceptable media sizes and weights.
1 If necessary, pull out the extension tray to fit
the length of paper to be used.
2 Place the paper along the right side of the
Bypass Feeder (refer to Figure 2.4 on page
2-12 and Figure 2.5 on page 2-13 for paper
orientation, and Figure 2.6 on page 2-14 for
envelope orientation).
3 Push the paper guide to slightly touch the
paper stack (to ensure contact with the paper
sensor).
4 Push the paper as far as it can go into the
printer.