Xerox DP N24 System Administrator Manual Download Page 303

Page: 303 / 336

Network Interface Card (NIC)

Appendix C: Installing and Removing Printer Options

❖

C-55

Loosen the thumbscrews and pull out the

controller board. Set it on a flat surface.

Use the screw driver/nut driver to remove the

two screws that hold the NIC in place as

illustrated. Set the screws aside.

Remove the NIC by gently lifting it away from

the 96 pin receptacle and pulling it away from

the controller board.

Reinstall the cover plate on the controller

board using the two screws.

Summary of Contents for DP N24

















































































































































































































































































































































Search results

Summary of Contents for DP N24

Reviews:

Related manuals for DP N24

Brands by name

Popular brands

Xerox DP N24, System Administrator Manual

Search results

Summary of Contents for DP N24

Reviews:

Related manuals for DP N24

Brands by name

Popular brands