76
Step
8
–
Drink & Cup Fluid Levels
The following fluid levels are recommended for a standard in 7oz & 9oz cups.
Drink Volume in fl/oz
Section Drink Selection
7oz Cup
9oz Cup
Espresso's 55 - 58
2.0 - 2.5
3.0 - 3.5
4.1
D/ Espresso's 81- 84
4.0 - 4.5
5.0 - 5.5
4.2
Americano's 60 - 63
5.0 - 5.5
7.0 - 7.5
4.3
Cappucino's 75 -76
5.0 - 5.5
7.0 - 7.5
4.4
Café Latte 's 73 - 74
5.0 - 5.5
7.0 - 7.5
Only start setting the fluid levels for the BTC drinks after fresh beans have been
placed into the BTC hopper.
Set the levels for BTC Espresso (1
st
Drink selection to check)
1. Note: BTC water routing should be enabled as standard for BTC Espresso &
Double Espresso selections only.
2. In service mode set Address 141 = 2
3. In test mode take selection 58 (BTC Espresso coffee with sugar and
whitener) and measure the fluid level.
4. Set the required fluid level by adjusting the main water throw time for that
selection= Address 756.
5. Adjust the value in this address until the required fluid level has been
achieved (2 - 2.5fl/oz for Espresso).
6. Once the base level has been set start checking
ALL
the other drinks
options for that selection.
7. Take x1 of each of the BTC Espresso selections (with and without whitener
and sugar) in test mode and ensure that the fluid levels are acceptable. 58,
55, 56 & 57
8. If the fluid levels vary across the drink ‘options’, then adjust the levels by
using the allocated address for that selection. See details in the example
below:
e.g. set the selection fluid levels in the following order:
Selection
58 = Base
level for
Espresso
Summary of Contents for Eco Encore
Page 1: ...Eco Encore Solo Encore Technical Manual...
Page 141: ......
Page 142: ......
Page 143: ......