Westomatic Eco Encore, Technical Manual

Page: 74 / 150

73
Step 4 – Weigh Ingredients
1. Remove bean to cup cover plate – see Brewer Assembly Plate
2. Remove the freshbrew canister to gain better access to the BTC system, to
avoid unnecessary mess, turn the delivery chute upwards.
3. Unscrew, but do not completely
remove, the brass thumbscrews on
the brewer allowing the brewer to drop
downwards to the rest position
4. In service mode enter address 754
5. Weigh a cup and tare/zero the scales
6. Press the blank key on the keypad (alarm will sound for 5 seconds)
7. During this time, hold cup under doser unit, the
grinder will be active until the switch is activated
and dry dispense into the cup
8. Weigh the cup again (recommended gram throw 6.5 - 7.5 grams)
Step 5 – Ingredient Throw Adjustment
1. If this is incorrect, unscrew the stopping nut (a) and let (b) slide along to the
notch corresponding to the desired dosage (recommended gram throw 6.5 - 7.5
grams). Tighten stopping nut (a).
2. Repeat points 6 – 8 & Step 5.1 until the correct gram throw is achieved.
Dosing unit
(a)
Dosing Unit Adjustment
(b)
BTC Brewer
Brass
Thumbscrews