Westomatic Eco Encore, Technical Manual, Page: 79 / 150

78
Perfecting BTC Drink Quality
Please check the following table when you are installing & setting up the BTC
brewer, this will help aid in obtaining good quality bean to cup drinks.
Quick Reference Table
Note:
The following notes may vary depending on the brand of beans being used:
BEAN TO CUP PRODUCT
GRINDER SET UP
ACTIONS
Excessive Water through the beans
Turn grinder adjuster ‘A’ clockwise
Fast coffee flow rate into cup
Turn ‘A’ clockwise
Weak coffee Turn ‘A’ clockwise, increase the throw
time
Pale, Thin crema Turn ‘A’ clockwise, increase the throw
time
Solid bean plug but coffee waste spilling
during the home to dispense position
Grind too course
Possibly 2-8 bar
Turn ‘A’ clockwise, decrease
bean throw time to reduce bean
waste
Good flow of water through the beans
Steady coffee flow of water into the cup
Good strength coffee
Creamy – Golden Crema
Good bean plug with no waste during
the home to dispense position
Medium grind
8-11 bar
No action required
Less water through the beans creating
short drink levels
Turn grinder adjuster ‘A’ anti-clockwise
Slow coffee flow rate into the cup
Turn ‘A’ anti-clockwise
Strong coffee
Turn ‘A’ anti-clockwise
Brown crema
Turn ‘A’ anti-clockwise
Wet bean plug wit no waste during the
home to dispense position Increase bean throw time to form a
more solid plug of waste
The brewer forced under too much
pressure
Grind too fine
Possibly 11-15 bar
Turn ‘A’ anti-clockwise &/or reduce the
amount of product
Routine BTC System Cleaning Instructions
1. Perform a flush cycle until water runs clear (button 6)
2. Brush outside of brewer with dry brush
3. Wash bean hopper and ensure it is completely dry before replacing
After 20,000 BTC vends, remove brewer and soak thoroughly