46
MAXIMUM PAYOUT - MDB Address 227 (Default setting = 0200)
Maximum value of change able to be dispensed. If the value exceeds this
figure more vends will be required before change is given.
SINGLE/MULTI VEND – Address 228
0 = Single vend
1 = Multi vend
FORCE VEND – Address 229
0 = Permit change without vend
1 = Inhibit change without vend
INSTANT CREDIT TO CARD – Address 230
0 = Press reject lever to assign cash to card
1 = Credit card with cash automatically
PIN FREE/DISCOUNT VEND PERIOD TIMING – Address 237
This facility enables random free/discount vends, for a pre-programmed period
duration, to be initiated via a personal identification number. Access to this
facility is gained by pressing the '0' key on the external keypad three times.
Four flashing question marks on the LCD prompt insertion of a valid PIN (PINs
are programmed within Addresses 238 - 243 Free Vend PINs and Addresses
244 to 249 Discount PINs). Upon acceptance, all selections set-up as ‘timed
free vend available’ will switch to free/discount vend for the duration set. The
free period duration is programmable in 30-second increments from 0001 -
9999. Address content examples:-
0 = Inactive
1 = 30 second free duration
2 = 60 second free duration
10 = 5 minute free duration (10 x 30 seconds)
The discount value for ‘discount’ vend PINs is programmed within Address 258.
NOTE:
Should 3 consecutive invalid PINs be inserted, the processor will abort the
routine, and the LCD will report ‘PIN facility temporarily disabled’. The facility
will remain disabled for a period of four minutes.
FREE VEND PIN NUMBERS – Addresses 238 – 243
Up to 6 four-digit pin numbers maybe entered to allow the machine to switch
into free vend – also see addresses 250 to 255
DISCOUNT VEND PIN NUMBERS – Addresses 244 – 249
Up to 6 four-digit pin numbers maybe entered to allow the machine to switch
into discount vend – also see addresses 250 to 255 and address 258.
Summary of Contents for Eco Encore
Page 1: ...Eco Encore Solo Encore Technical Manual...
Page 141: ......
Page 142: ......
Page 143: ......